IC-530S / 530PS / 550PS

Powerful hydraulic Rolling Machine

Advantage:

1.High efficiency and accuracy.
2.Structure rugged.
3.Operation is very simple.
4.Widely used

Rolling screw roller teeth of two rollers, effiecently and effective cooling of the melt casting process instead of cutting to form metal structure, the benefits of this process not only can more quickly and accurate mass production of screws and than to cut produced rolled screw has greater tension, shear and practicality of stretching.

Product Feature:
1.Slide the creativity to bilateral frame shaped sliding track, and oblique tip regulation, in the heavy pressure of rolling, skateboard absolute stability and rises, sliding seat is not easy to wear. Be track after heat treatment, after grinding. Can be added to form slide oil system (timing) and prolong the life of the advantages of rail.

2.Slide stroke and speed can be adjusted, rolling pressure also from the hydraulic valve arbitrary choice, from 0.5 to 30 tons, of thin tube or square teeth and steam locomotive straight tooth shaft rolling more appropriate.

3.the speed of the roller axis is divided into two steps each with four direct conversion speed (20~160 ruler P.M). The size of the circumference of the thickness or the rolling circle can be matched with the appropriate rolling speed, so that the quality is better, and the life of the roller increases and the output increases.

4.Rolling made time with automatic control of time, from 0.1 to infinite (i.e. roll pass infinitely long), or interrupt stop immediately, regarding the quality of sperm in bad influence is very big, because fine thread rolling time is short, coarse thread for a long time, with such a rolling more accord with economic and precision.

5.All tough structure, with a strong hydraulic rolling, institutions with a fusion of various cast steel, and after 24 hours of tempering treatment, absolute guarantee of strong and durable.

6.Can be equipped with microcomputer fixed position switch, and foot emergency knife switch.

7.530S and 530PS all tooth structure with iron welding molding, and the tempering treatment, the absolute guarantee quality.

8.Combine the oil pressure box and the fuselage to reduce the floor area.

9.The gearbox uses the circulating type oil system, can reduce the high temperature caused by the ohm rotation friction, and can prolong the service life of the ohm.