分享
IC-20 / 30D
分類: 滾牙機
 |
IC-20 / 30D 鎰全滾牙機 此機種係利用齒輪減速比以凸輪進退滾製螺絲，操作方便滾製精度高。滑板座創新經高週波處理，後研磨，必用磷青銅斜梢調整，加大進度，凸輪使爬坡滑順，增加滾製壓力及滑板的穩定性。和加裝給油系統延長滑板壽命之優點。
鎰全滾牙機之優點： 滾牙機裡的二個滾輪滾製螺絲，乃以有效的冷卻鎔鑄過程取代切割方式形成金屬的結構，此種過程的益處不僅能更迅速且精確的大量生產螺絲且比以切割方式所產生的滾製螺絲有更大的伸張力、剪力和實用性。 |
IC-20
| 規格 SPECIFICATIONS | IC-20 | |
| 滾製螺絲直徑範圍 Thread Diameter | 5mm ~ 22mm | |
| 節距範圍 Pitch | 0.75 ~ 2.5P | |
| 滾製螺絲最大長度 Maximum length of thread | 48mm | |
| 滾輪轉速 Rotary die speed | 40rpm | |
| 滾輪外徑 Maximum diameter or rotary dies | 120mm | |
| 滾輪內徑 Bore diameter of rotary dies | 40mm | |
| 滾輪厚 Width of rotary dies | 50mm | |
| 滾輪軸間最大距 Maximum centre distance of die-spindled | 140mm | |
| 滾輪軸間最小距 Minimum centre distance of die-spindled | 100mm | |
| 滾轉量 Output (pcs/min) | 9 ~ 30 | |
| 床面至滾輪中心距 Height from table surface to die center | 118mm | |
| 三相交流馬達 Motor: 3 phase, A.C. | 3HP | |
| 機械體積 Overall dimensions (L×M×H) | 1090×740×1070mm | |
| 重量 Net weight, approx | 970kg | |
| 裝箱尺寸 Size of packing | 1245×850×1220mm | |
| 箱重 Packing nets weight | 160kg | |
IC-30D
| 規格 SPECIFICATIONS | IC-30D | |
| 滾製螺絲直徑範圍 Thread Diameter | 6mm ~ 40mm | |
| 節距範圍 Pitch | 0.75 ~ 3.0P | |
| 滾製螺絲最大長度 Maximum length of thread | 150mm | |
| 滾輪轉速 Rotary die speed | 40rpm | |
| 滾輪外徑 Maximum diameter or rotary dies | 150mm | |
| 滾輪內徑 Bore diameter of rotary dies | 54mm | |
| 滾輪厚 Width of rotary dies | 150mm | |
| 滾輪軸間最大距 Maximum centre distance of die-spindled | 187mm | |
| 滾輪軸間最小距 Minimum centre distance of die-spindled | 140mm | |
| 滾轉量 Output (pcs/min) | 7 ~ 20 | |
| 床面至滾輪中心距 Height from table surface to die center | 130mm | |
| 三相交流馬達 Motor: 3 phase, A.C. | 7.5HP | |
| 機械體積 Overall dimensions (L×M×H) | 1220×810×1120mm | |
| 重量 Net weight, approx | 1300kg | |
| 裝箱尺寸 Size of packing | 1365×925×1295mm | |
| 箱重 Packing nets weight | 180kg | |
